Skip to content

120AH 12 Volt Lithium Deep Cycle Battery 

Every now and then, a technological breakthrough occurs that has a major impact on the Australian recreational vehicle industry. One such breakthrough that is creating a lot of buzz and excitement is the iTECH120 lithium battery. The iTECH120 is a 120 Amp Hour lithium battery that has been designed and developed by Australian, family owned and operated company iTechworld. Currently, lead acid RV batteries dominate the market in Australia, but there’s a superior alternative to these traditional heavy batteries. That alternative is the iTECH120. Older tech Lithium batteries have been around for years, but the technology’s have never been up to the standard of the iTECH120. The biggest issue with older lithium being that a specialised charger was required to re-charge.The design and development team at iTechworld have studied the marketand have brought together the most advanced battery available anywhere in the world. As iTechworld are proudly Australian they have used lithium sourced in Western Australia for their iTECH120.
 

The main benefit of the iTECH120 is that it weighs considerably less than your existing lead acid batteries. Most 120 Amp Hour deep cycle batteries weigh upwards of 30kg the iTECH120 lithium battery weighs just 13kg, yes you did read that correctly, just 13kg! Three years of development on the iTECH120 has enabled iTechworld to pre-install advanced battery technology into each unit. This is what sets the iTECH120 in a class of its own, the Redback™️  Lithium Operating System technology has been patent pending and is exclusive to iTechworld The iTECH120 is the only lithium battery suitable for inverter use as it has an extremely large discharge current, you can pull a a massive 280 Amps from the iTECH120, most other lithium batteries only let you take approx 50 Amps making them almost useless. The  Redback™️  Lithium Operating System has been designed specifically for the demanding Australian market. This internal technology allows you to hook up to 4 iTECH120 batteries together in parallel or series. The pre-installed internal technology also allows you to use existing charging systems such as battery chargers and solar panels. 

No changing of systems, equipment or extensive re-wiring is required in most cases. You simply pull your old heavy batteries out (if your back allows it) and put the new lightweight iTECH120 in. It’s as easy as that. The iTECH120 is the only true drop-in upgrade for your existing old and heavy batteries, in most cases. One iTECH120 battery is the equivalent to around 200AH in lead acid. You are probably already familiar with the tedious process of replacing a lead acid battery once every two or three years. This is a thing of the past as an investment in an iTECH120 battery will give you a much more modern, clean and light weight power source that can do 4 times as many cycles as your lead acid battery. A cycle is how battery life is measured each cycle is measured as one full discharge and then one full re-charge of a battery. A standard lead acid battery can cycle approx. 500 times. The ITECH120 can do approx. 2000 times. The iTECH120 is the only lithium battery withtrue 280A maximum discharge. The iTECH120 is the only lithium battery in the world with the Redback️  Lithium Operating System installed as standard. This is the heart beat of the battery and makes it the only true drop-in upgrade lithium battery in most cases. 

FEATURES:
Heavy duty case
Can be connected in parallel(up to 4) 
Can be connected in series (up to 4)
High discharge current max 280A
Heavy duty removable M8 Bolt Battery terminals
Maintenance free
Lithium
Lifting handle fitted to ensure secure hold when moving
In built battery management system
Redback™️  Lithium Operating Systeminstalled as standard.
Built in over discharge protection.

SPECIFICATIONS:
Nominal Voltage: 12.8v
Charging Voltage: 14.7v or less
Automatic discharge cut off Voltage: 10v
Standard discharge current: 130A
Max discharge current: 280A 
Standard charge current: 50A
Maximum charge current: 100A
Output connector: M8 Stud
This battery is not water proof. IP55.
Weight: 13kg each
Dimensions: 330x173x215mm . (LxWxH) per unit (Height 225mm including terminals)
Optimal charge temp range: 0°c to + 45°c
Optimal discharge temp range: -20°c to + 60°c
Optimal storage temp: -10°c to + 45°c
Uses standard M8 Studs 

PACKAGE CONTENTS:
1x 120AH 12V Lithium Battery
Pre-installed Redback️  Lithium Operating System
Statutory warranty is 36 months from date of purchase.
Storage deep cycle battery only. Can not be used as a cranking battery. 

Lithium Car Battery 12V Stop Start 1300CCA iTECH1420CA 60Ah

iTechworld have developed right here in Australia a new lithium battery specific for the Australian market.  Its called the ITECH1420CA, it will have a major impact on the Australian battery industry. This battery break-through is creating a lot of buzz and excitement.  The iTECH1420CA is a 60 Amp Hour lithium battery that has been designed and developed by Australian, family owned and operated company, iTechworld.  Currently, lead acid batteries dominate the car starting market around the world.  But there’s a superior alternative to these traditional heavy batteries. That alternative is the iTECH1420CA.  This new technology will allow the use of lighter more powerful lithium batteries to start cars, 4WD’s, boats and more.  The biggest issue with older lithium battery technology is that they required a specialised charger. The design and development team at iTechworld have studied the market and have brought together the most advanced lithium  cranking battery available anywhere in the world. The iTECH1420CA.

The iTECH1420CA  weighs considerably less than your existing lead acid batteries.  Equivalent in capacity to a 120 Amp Hour lead acid battery that weighs upwards of 30kg, the iTECH1420CA lithium battery weighs just 8kg, yes you did read that correctly, just 8kg.  5 years of development on the iTECH1420CA has enabled iTechworld to pre-install advanced battery technology into each unit.  This is what sets the iTECH1420CA in a class of its own, the Redback Cranking Lithium Operating System™️  technology has been patent pending and is exclusive to iTechworld. 
The iTECH1420CA is the only lithium battery in the world that we know off able to produce this high amount of power suitable for cranking use.  It can deliver a massive 1500 Cranking Amps. The Redback Cranking Lithium Operating System™️ (patent pending) has been designed specifically for the demanding Australian market. This internal technology allows you to deliver this amount of cranking power. The pre-installed internal technology also allows you to use existing charging systems such as alternators, battery chargers and solar panels.

You simply remove your old heavy battery and put the new lightweight iTECH1420CA in its place. It’s as easy as that.  The iTECH1420CA is the only drop-in upgrade for your existing old and heavy batteries.  One iTECH1420CA lithium battery is the equivalent to 120AH in lead acid.  You are probably already familiar with the tedious process of replacing a lead acid battery once every two or three years.  This is a thing of the past as an investment in an iTECH1420CA lithium battery will give you a much more, a clean and light weight power source that can do 4 times as many cycles as your lead acid battery.  A cycle is how battery life is measured.  Each cycle one full discharge and then one full re-charge of a battery.  A standard lead acid battery can cycle approx. 500 times.  The  iTECH1420CA can cycle approx. 1500 times. The iTECH1420CA is the only lithium battery with 1500 Cranking Amps that we know off.  The iTECH1420CA  is the only lithium batteries in the world with the Redback Cranking Lithium Operating System™️ (patent pending) installed as standard. This is the heartbeat of the battery and makes it the only true drop-in upgrade lithium cranking battery. 

The only Lithium Ion Batteries that can be charged using normal 12V car alternator, battery chargers / alternators except for Chargers with Automatic Rejuvenation or Desulphation Mode.  

FEATURES:
Heavy duty case
High discharge current 1500 Cranking Amps
Heavy duty battery terminals
Maintenance free
Lithium ion
Lifting handle fitted to ensure secure hold when moving
Redback Cranking Lithium Operating System™️ (patent pending) installed as standard.
Over discharge protection

SPECIFICATIONS:
Nominal Voltage: 12.8v
Max discharge current or Cranking Amps : 1500CA ( 5sec )
Cold Cranking amps 1300CCA ( At -20C )
Standard discharge current: less than 200A
Charging Voltage: 14.7v or less
Discharge cut off Voltage: 8v
Standard charge current: less than 30A
Usable capacity 60Ah
Case material ABS
IP Rating is IP64
Life cycles 1500
Auto post terminals
Weight: 8kg 
Dimensions: L*W*H 280*176*190mm ( Height including terminals )
Optimal working temp range: -20°c to + 80°c 

PACKAGE CONTENTS:
1x 1420AH 12V Lithium Cranking Battery
Pre-installed Redback Lithium Operating System™️ (patent pending) 

Statutory warranty is 24 months from date of purchase. 

 Dual input 25A In-Vehicle DC Battery Charger iTECHBCDC25 DCDC

The iTECHBCDC25 is a 12-volt 25A input In-vehicle DC to DC battery charger designed to charge your vehicles batteries. The iTECHBCDC25 uses your vehicles alternator to charge batteries, the iTECHBCDC25 can also charge your battery via solar panels through its MPPT solar input section. Maximum Power Point Tracking (MPPT) allows the iTECHBCDC25 to increase your solar panels efficiency by up to 30% and to charge your batteries the most effective way. 

The iTECHBCDC25 utilizes state of the art charging profiles to cater for all battery types including lithium. The charging algorithms (patent pending) for each charge profile has been designed and developed by iTechworld to optimise charging. You can change the battery charging profile on the iTECHBCDC25 with a push of a button. Whether you have Lead Acid, AGM, Gel, Calcium or Lithiumbatteries the iTECHBCDC25 will charge the batteries the quickest and most effective way. 

The iTECHBCDC25 carries a full IP67 rating. The iTECHBCDC25 is fully dust, water and vibration proof.  Built with a heavy-duty case and mounting brackets designed specifically to handle vibrations from corrugated roads and to stand up to the harsh Australian environment. 

Compact and easy to install, every iTechworld ITECHBCDC25 comes fitted with colour coded Anderson connectors. Each Anderson connector is labelled for Solar input, DC alternator input and secondary battery output.

The iTECHBCDC25 comes with an optional over ride cable that will force the power to come from the alternator when the vehicle is running. 

The iTECHBCDC25 is a must have for all 12 or 24-volt vehicle systems, the iTECHBCDC25 is fully compatible with regular alternators and smart alternators. 

FEATURES:

Separate DC and solar charging inputs
Maximises the performance and life of your auxiliary battery
Simultaneous DC and solar charging with Solar Power Priority
Statutory warranty is 12 months from date of purchase.
Suits 12V/24V standard and variable voltage/smart alternators
Suitable for:-
AGM batteries
GEL batteries
Standard lead acid batteries,
Calcium batteries
LiFePO4 batteries.
Dimensions: 210mm*130mm*40mm (L*W*H)

PACKAGE CONTENTS:
1x iTECHBCDC25 fitted with colour coded and labeled Anderson connectors.
1x Set of corresponding labeled and colour coded Anderson Plug fittings with cables attached. 

Reviews

There are no reviews yet.

Be the first to review “iTECHWORLD”

Your email address will not be published. Required fields are marked *

Scroll To Top